94ON08-1C
Key Features:
  • 3.5 X 1.6" (40 X 90mm), 8 ohm
  • Full Range, 2 watts
  • Insulated tinsel leads for higher excursion
  • Neodymium magnet, Composite cone with rubber surround
  • RoHS compliant

Primary Specifications

Speakers Environment Outdoor
ROHS Compliant Yes

Technical Specifications

UNIT of MEASURE
Nominal Basket Diameter 3.5 x 1.6 / 40.0 x 90.0 inch / mm
Rated Impedance 8 ohms
Rated Power 2.0 Watts
Program Power 3 Watts
Frequency Range 100-19000 Hz
Sensitivity
(2.83 V input measured at 1 Meter)
82 dB SPL
Voice Coil Diameter 1.0 / 25.4 inch / mm
Magnet Weight 0.5 / 13 oz / gr
Transformer

Small Signal Parameters

UNIT of MEASURE
Resonant Frequency (fo) 115 Hz
D.C. Resistance (Re) 6.7 ohms
Mechanical Q (Qms) 4.2
Electrical Q (Qes) 2.32
Total Q (Qts) 1.49
Compliance Equivalent Volume (Vas) 0.6 ltr
BL Product (BL) 1.9 T-M
Maximum Linear Excursion (Xmax) 0.1 mm
Surface Area of Cone (Sd) 19.0 cm2
Moving Mass (Mmd) g

Material Descriptions

 
Basket Plastic
Terminal Size 0.110 X 0.02
Magnet Neodymium
Voice Coil Wire Copper
Voice Coil Form Kapton
Cone Composite
Cone Edge Rubber
Dust Cap None
http://s3.amazonaws.com/misco/curves/94ON08-1C.JPG?1395355971
ID Description Measurements Tolerance
OD Outside Diameter 3.5 in. +/- 0.040”
CD Cutout Diameter 3.4 in. +/- 0.030”
MG Magnet Diameter 1.4 in. +/- 0.050”
HD Hole Diameter 0.1 in. +/- 0.020”
MD Mounting Diameter 3.2 in. +/- 0.020”
ID Internal Depth 0.4 in. Maximum
FT Flange Thickness 0.19 in. +/- 0.050”
NW Net Weight 53.0 g
neodymium