Model # A35S

A35S
Key Features:
  • 3 X 5" (77 X 127mm), 8 ohm
  • Voice Range, 3 watts
  • Alnico magnet, paper cone;
Request A Product Quote
Download Product Specifications (PDF)

Product Specifications & Parameters

Primary Specifications

Speakers Environment Indoor
ROHS Compliant No

Technical Specifications

UNIT of MEASURE
Nominal Basket Diameter 3.0 x 5.0 / 77.0 x 127.0 inch / mm
Rated Impedance 8 ohms
Rated Power 3.0 Watts
Program Power 6 Watts
Frequency Range 150 - 10000 Hz
Sensitivity
(2.83 V input measured at 1 Meter) 		88 dB SPL
Voice Coil Diameter 0.7 / 17.8 inch / mm
Magnet Weight 0.5 / 15 oz / gr
Transformer

Small Signal Parameters

UNIT of MEASURE
Resonant Frequency (fo) 259 Hz
D.C. Resistance (Re) 6.3 ohms
Mechanical Q (Qms) 6.99
Electrical Q (Qes) 8.57
Total Q (Qts) 3.85
Compliance Equivalent Volume (Vas) ltr
BL Product (BL) T-M
Maximum Linear Excursion (Xmax) 1.3 mm
Surface Area of Cone (Sd) cm2
Moving Mass (Mmd) g

Material Descriptions

 
Basket Stamped Steel
Terminal Size 0.19 X 0.02
Magnet Alnico
Voice Coil Wire Copper
Voice Coil Form Aluminum
Cone Paper
Cone Edge Paper
Dust Cap paper

Sensitivity / Frequency

http://s3.amazonaws.com/misco/curves/A35S.JPG?1345609800

Drawing

ID Description Measurements Tolerance
OD Outside Diameter 3.0 in. +/- 0.040”
CD Cutout Diameter 2.8 in. +/- 0.030”
MG Magnet Diameter 0.9 in. +/- 0.050”
HD Hole Diameter 0.2 in. +/- 0.020”
MD Mounting Diameter 2.6 in. +/- 0.020”
ID Internal Depth 1.4 in. Maximum
FT Flange Thickness 0.1 in. +/- 0.050”
NW Net Weight 99.0 g
neodymium