DC26S
Key Features:
  • 2 X 6" (50 X 156mm), 8 ohm
  • Voice Range, 4 watts
  • Ferrite magnet, paper cone with paper surround;

Primary Specifications

Speakers Environment Indoor
ROHS Compliant No

Technical Specifications

UNIT of MEASURE
Nominal Basket Diameter 2.0 x 6.0 / 50.0 x 156.0 inch / mm
Rated Impedance 8 ohms
Rated Power 4.0 Watts
Program Power 8 Watts
Frequency Range 280 - 8000 Hz
Sensitivity
(2.83 V input measured at 1 Meter)
93 dB SPL
Voice Coil Diameter 0.7 / 17.8 inch / mm
Magnet Weight 2.4 / 68 oz / gr
Transformer

Small Signal Parameters

UNIT of MEASURE
Resonant Frequency (fo) 415 Hz
D.C. Resistance (Re) 6.3 ohms
Mechanical Q (Qms) 8.49
Electrical Q (Qes) 4.81
Total Q (Qts) 3.07
Compliance Equivalent Volume (Vas) ltr
BL Product (BL) T-M
Maximum Linear Excursion (Xmax) 0.9 mm
Surface Area of Cone (Sd) cm2
Moving Mass (Mmd) g

Material Descriptions

 
Basket Stamped Steel
Terminal Size 0.19 X 0.02
Magnet Ferrite
Voice Coil Wire Copper
Voice Coil Form Aluminum
Cone Paper
Cone Edge Paper
Dust Cap Paper
http://s3.amazonaws.com/misco/curves/DC26S.JPG?1345609896
ID Description Measurements Tolerance
OD Outside Diameter 6.2 in. +/- 0.040”
CD Cutout Diameter 6.0 in. +/- 0.030”
MG Magnet Diameter 2.1 in. +/- 0.050”
HD Hole Diameter 0.2 in. +/- 0.020”
MD Mounting Diameter 1.9 in. +/- 0.020”
ID Internal Depth 1.4 in. Maximum
FT Flange Thickness 0.1 in. +/- 0.050”
NW Net Weight 245.0 g
ceramic