EEN32WP-45A
Key Features:
  • 3.5" (87 mm), 45 ohm
  • Voice Range, 12 watt
  • Neodymium magnet, red acrylic treated cloth cone
  • rubber gasket

Primary Specifications

Speakers Environment Outdoor
ROHS Compliant No

Technical Specifications

UNIT of MEASURE
Nominal Basket Diameter 3.5 / 87.0 inch / mm
Rated Impedance 45 ohms
Rated Power 12.0 Watts
Program Power 24 Watts
Frequency Range 300 - 8500 Hz
Sensitivity
(2.83 V input measured at 1 Meter)
84 dB SPL
Voice Coil Diameter 0.8 / 20.3 inch / mm
Magnet Weight 0.8 / 23 oz / gr
Transformer

Small Signal Parameters

UNIT of MEASURE
Resonant Frequency (fo) 450 Hz
D.C. Resistance (Re) 32.0 ohms
Mechanical Q (Qms) 3.9
Electrical Q (Qes) 1.6
Total Q (Qts) 1.1
Compliance Equivalent Volume (Vas) ltr
BL Product (BL) T-M
Maximum Linear Excursion (Xmax) 1.2 mm
Surface Area of Cone (Sd) cm2
Moving Mass (Mmd) g

Material Descriptions

 
Basket Stamped Steel
Terminal Size 0.19 X 0.02
Magnet Neodymium
Voice Coil Wire Copper
Voice Coil Form Aluminum
Cone Red Acrylic Treated Cloth
Cone Edge Red Acrylic Treated Cloth
Dust Cap Red Acrylic Treated Cloth
http://s3.amazonaws.com/misco/curves/EEN32WP-45A.JPG?1345610049
ID Description Measurements Tolerance
OD Outside Diameter 3.5 in. +/- 0.040”
CD Cutout Diameter 3.1 in. +/- 0.030”
MG Magnet Diameter 1.1 in. +/- 0.050”
HD Hole Diameter 0.19 in. +/- 0.020”
MD Mounting Diameter 3.9 in. +/- 0.020”
ID Internal Depth 1.0 in. Maximum
FT Flange Thickness 0.1 in. +/- 0.050”
NW Net Weight 104.0 g
neodymium