EEN3W-8C
Key Features:
  • 3" (77 mm), 8 ohm
  • Full Range, 15 watts
  • Neodymium magnet, polyproplyene cone with rubber surround
  • RoHS Compliant;

Primary Specifications

Speakers Environment Outdoor
ROHS Compliant Yes

Technical Specifications

UNIT of MEASURE
Nominal Basket Diameter 3.0 / 77.0 inch / mm
Rated Impedance 8 ohms
Rated Power 15.0 Watts
Program Power 30 Watts
Frequency Range 100-18000 Hz
Sensitivity
(2.83 V input measured at 1 Meter)
85 dB SPL
Voice Coil Diameter 0.8 / 19.4 inch / mm
Magnet Weight 0.8 / 22 oz / gr
Transformer

Small Signal Parameters

UNIT of MEASURE
Resonant Frequency (fo) 95 Hz
D.C. Resistance (Re) 6.7 ohms
Mechanical Q (Qms) 1.5
Electrical Q (Qes) 0.55
Total Q (Qts) 0.41
Compliance Equivalent Volume (Vas) 1.3 ltr
BL Product (BL) 4.1 T-M
Maximum Linear Excursion (Xmax) 1.4 mm
Surface Area of Cone (Sd) 28.0 cm2
Moving Mass (Mmd) g

Material Descriptions

 
Basket Stamped Steel
Terminal Size .110 X 0.02 / 0.205 X 0.02
Magnet Neodymium
Voice Coil Wire Copper
Voice Coil Form Aluminum
Cone Polypropylene
Cone Edge Rubber
Dust Cap Paper
http://s3.amazonaws.com/misco/curves/EEN3W-8C.JPG?1411764975
ID Description Measurements Tolerance
OD Outside Diameter 3.1 in. +/- 0.040”
CD Cutout Diameter 2.8 in. +/- 0.030”
MG Magnet Diameter 1.1 in. +/- 0.050”
HD Hole Diameter 0.23 in. +/- 0.020”
MD Mounting Diameter 3.3 in. +/- 0.020”
ID Internal Depth 1.3 in. Maximum
FT Flange Thickness 0.1 in. +/- 0.050”
NW Net Weight 109.0 g
neodymium