EN32S-FR
Key Features:
  • 3.5" (87 mm), 8 ohm
  • Voice Range, 8 watts
  • Neodymium magnet, flame retardant paper cone
  • ROHS Compliant

Primary Specifications

Speakers Environment Indoor
ROHS Compliant Yes

Technical Specifications

UNIT of MEASURE
Nominal Basket Diameter 3.5 / 87.0 inch / mm
Rated Impedance 8 ohms
Rated Power 8.0 Watts
Program Power 16 Watts
Frequency Range 200 - 12000 Hz
Sensitivity
(2.83 V input measured at 1 Meter)
89 dB SPL
Voice Coil Diameter 0.8 / 20.3 inch / mm
Magnet Weight 0.4 / 12 oz / gr
Transformer

Small Signal Parameters

UNIT of MEASURE
Resonant Frequency (fo) 340 Hz
D.C. Resistance (Re) 6.3 ohms
Mechanical Q (Qms) 5.6
Electrical Q (Qes) 2.0
Total Q (Qts) 1.9
Compliance Equivalent Volume (Vas) ltr
BL Product (BL) T-M
Maximum Linear Excursion (Xmax) mm
Surface Area of Cone (Sd) cm2
Moving Mass (Mmd) g

Material Descriptions

 
Basket Stamped Steel
Terminal Size 0.187 (+) & 0.110 (-)
Magnet Neodymium
Voice Coil Wire Copper
Voice Coil Form Aluminum
Cone Flame Retardant Paper
Cone Edge Flame Retardant Paper
Dust Cap Flame Retardant Paper
http://s3.amazonaws.com/misco/curves/EN32S-FR.JPG?1357162105
ID Description Measurements Tolerance
OD Outside Diameter 3.5 in. +/- 0.040”
CD Cutout Diameter 3.1 in. +/- 0.030”
MG Magnet Diameter 1.1 in. +/- 0.050”
HD Hole Diameter 0.2 in. +/- 0.020”
MD Mounting Diameter 3.9 in. +/- 0.020”
ID Internal Depth 1.0 in. Maximum
FT Flange Thickness 0.1 in. +/- 0.050”
NW Net Weight 97.0 g
neodymium