OC10W-8D
Key Features:
  • 10" (250mm), 8 ohm
  • Woofer, 100 watts
  • Ferrite magnet, Black Polypropylene cone and dust cap with Natural rubber surround
  • RoHS compliant

Primary Specifications

Speakers Environment Indoor
ROHS Compliant Yes

Technical Specifications

UNIT of MEASURE
Nominal Basket Diameter 10.0 / 250.0 inch / mm
Rated Impedance 8 ohms
Rated Power 100.0 Watts
Program Power 200 Watts
Frequency Range 20 - 1000 Hz
Sensitivity
(2.83 V input measured at 1 Meter)
89 dB SPL
Voice Coil Diameter 2.0 / 50.8 inch / mm
Magnet Weight 40.0 / 1136 oz / gr
Transformer

Small Signal Parameters

UNIT of MEASURE
Resonant Frequency (fo) 21 Hz
D.C. Resistance (Re) 6.3 ohms
Mechanical Q (Qms) 6.9
Electrical Q (Qes) 0.33
Total Q (Qts) 0.31
Compliance Equivalent Volume (Vas) 199.0 ltr
BL Product (BL) 11.1 T-M
Maximum Linear Excursion (Xmax) 9.0 mm
Surface Area of Cone (Sd) 346.0 cm2
Moving Mass (Mmd) g

Material Descriptions

 
Basket Stamped Steel
Terminal Size 0.205 X 0.02
Magnet Ferrite
Voice Coil Wire Copper
Voice Coil Form Kapton
Cone Grey Carbon
Cone Edge Natural Rubber
Dust Cap Polypropylene
http://s3.amazonaws.com/misco/curves/OC10W-8D.JPG
ID Description Measurements Tolerance
OD Outside Diameter 10.1 in. +/- 0.040”
CD Cutout Diameter 9.1 in. +/- 0.030”
MG Magnet Diameter 5.3 in. +/- 0.050”
HD Hole Diameter 0.2 in. +/- 0.020”
MD Mounting Diameter 9.7 in. +/- 0.020”
ID Internal Depth 4.6 in. Maximum
FT Flange Thickness 0.18 in. +/- 0.050”
NW Net Weight 3620.0 g
ceramic