Make Your Yamaha NS-10s Sound Like New
Your YamahaTM NS-10TM monitors probably don't sound the way they used to. Studio monitor woofers live an especially hard life. They are often pushed past their design limits for hours at a time. Voice coils singe and deform while suspensions fatigue. The net result is increased distortion, an audible change in timbre and outright failure. This unacceptable for an industry that relies on the consistency and reliability of its tools.
Even if your NS-10s work, the woofers should be replaced every few years (in pairs) to restore the sound that made it the de facto standard of near-field monitors. Unfortunately, Yamaha stopped producing parts over fifteen years ago, and genuine replacement woofers are entirely unavailable.
The Cure: Bold North Audio's MS10-W
Introducing the most accurate reproduction of a Yamaha NS-10 woofer yet developed. Many have tried but none have succeeded in recreating the exact timbre of the woofer used in the most widely used studio monitor in history…until now.
MISCO’s goal in developing the MS10-W was not to improve upon the NS-10’s woofer performance but to exactly match its sound. Making a drop-in driver with a white cone is easy; getting a perfect sonic match is very difficult.
The proof that we succeeded is in the measurements and the listening.
On-axis frequency response measured with Klippel Near Field Scanner: Yamaha NS-10 black, BNA MS10-W blue, competitor “A” red. Click image to see more proof in the MS10-W Technical Brief.
Part # 82110, Model # MS10-W
Buy 1 $189.95 ea.
For best results replace both woofers at the same time
There is much more to the remarkable MS10-W.
© 1996-2021 MISCO/Minneapolis Speaker Company Inc., All Rights Reserved. MISCO, Bold North Audio, Redline, Warkwyn and Oaktron are registered trademarks of MISCO/Minneapolis Speaker Company Inc.